🧐 Think You’re Covered With a Final Walkthrough? Think Again.
Understanding your New Construction Final Walkthrough is crucial to ensuring a smooth home buying experience.
When preparing for your New Construction Final Walkthrough, it’s important to know what to expect and what to look for.
Your New Construction Final Walkthrough should include a thorough inspection of every aspect of the home.
If you’re buying a home, that last walkthrough with your agent can feel like your final safety net. But here’s the truth:
A final walkthrough is NOT a home inspection.
In fact, it’s not even close.
During the New Construction Final Walkthrough, many overlook critical issues that could cost you later.
We’ve seen clients walk into their brand-new homes thinking everything was perfect… until we showed up with our tools, cameras, moisture meters, and decades of experience.
Let’s break down what your final walkthrough misses — and what our inspections catch every single week.
1. 🔍 Cosmetic vs Critical: What Agents Focus On
Your agent walks with you through the house to confirm:
- The seller left the home in “acceptable” condition
- No major visible damage occurred since contract
- Appliances, lights, doors still appear functional
But here’s what they won’t do:
- Pop the attic hatch and inspect for rodent activity
- Test the GFCIs and AFCIs with a plug tester
- Scan the slab and walls for hidden moisture
- Inspect the HVAC system and temperature split
- Crawl into the crawlspace to check for leaks or mold
Final walkthroughs are surface level by nature. Our inspections? Foundation to roof.
2. 😱 Real Client Story: What the Walkthrough Missed
A couple recently hired Inspection Time to perform a final new construction inspection in Temple, TX. Their walkthrough happened the day before. Everything looked fine — floors were clean, walls were painted, appliances were installed.
But guess what?
🚨 We found a sewer gas leak under the kitchen sink
🚨 The upstairs bathroom exhaust was venting into the attic, not outside
🚨 The water heater flue pipe wasn’t properly sealed
🚨 And we detected 8% moisture behind the laundry room wall
None of these were visible. None were on the walkthrough checklist.
All could have cost them thousands after moving in.
Understanding the difference between a New Construction Final Walkthrough and a comprehensive inspection is vital.
3. 🎯 What We Actually Check (That Agents Can’t)
Many clients have been saved by thorough checks during the New Construction Final Walkthrough.
During a professional final home inspection, we inspect areas that are never covered in a walkthrough:
| Area | What We Do |
|---|---|
| Attic | Check insulation, venting, leaks, rodents, ductwork |
| Roof | Drone + ladder inspection (if safe), flashing, shingles |
| Electrical | Open panel, test outlets, verify GFCI/AFCI, look for hazards |
| Plumbing | Pressure test, drain testing, look for slow leaks or future failure signs |
| HVAC | Check airflow, temp split, filter setup, age, and refrigerant lines |
| Exterior | Evaluate grading, drainage, flashing, expansion joints, etc. |
Our team emphasizes the importance of a detailed New Construction Final Walkthrough to avoid costly repairs.
4. 📸 Image Suggestions
Here are images you can post with the blog or on social media:
- Split-image: One side labeled “Final Walkthrough” (smiling couple with clipboard), other side “What We Found” (thermal image of moisture in a wall)
- Infrared camera detecting ceiling moisture
- Drone image showing improperly installed roof vent
- Attic with disconnected exhaust vent and exposed nails
- Screenshot of our real inspection report with photos and arrows
Would you like me to generate any of these? Just let me know!
5. 💬 What Clients Say After They Hire Us
“We thought we were ready to close… until Inspection Time uncovered things we never would’ve caught. Best money we’ve spent.” — Real Client
“Aaron and his team caught major ventilation and wiring issues the builder missed. I don’t even want to think about what would’ve happened if we didn’t get them.” — New Construction Buyer, Cypress TX
6. 🛑 Don’t Risk It. Hire Inspection Time.
Final walkthrough ≠ inspection.
We catch what walkthroughs miss.
✅ Phase Inspections
✅ Final New Construction
✅ Warranty Inspections
✅ Thermal Scan
✅ Zip Level Foundation Readings
✅ Sewer Scope & More
Visualize what a successful New Construction Final Walkthrough looks like and what to check.
📍 Serving Temple, Waco, Killeen, Dallas, Austin, Houston & more.
📞 (254) 400-5041
🌐 www.InspectionTimeTX.com
Inspection Time — Inspections done right, everyone else is just looking around.
#FinalWalkthroughFails #HomeInspectionMatters #TexasHomeInspection #NewConstructionInspection #WarrantyInspection #InspectionTimeTX #TempleTX #WacoTX #AustinTX #HoustonTX #ThirdPartyInspection #BuyerBeware #RealEstateTips #WalkthroughChecklist #FinalWalkthroughTips
Feedback from clients highlights the need for a solid New Construction Final Walkthrough process.
After the New Construction Final Walkthrough, many buyers feel reassured about their purchase.
Our comprehensive approach during your New Construction Final Walkthrough aims to safeguard your investment.
Ultimately, the New Construction Final Walkthrough is your last chance to identify issues before moving in.
Remember, a thorough New Construction Final Walkthrough can reveal hidden problems that need addressing.
